| コンソール |
******************************************************************************
Cisco System ROMMON, Version 1.0.11, RELEASE SOFTWARE
Copyright (c) 1994-2020 by Cisco Systems, Inc.
Compiled Mon 10/12/2020 21:50:47.51 by builder
*******************************************************************************
Current image running: Boot ROM0
Last reset cause: PowerOn (0x00000001)
DIMM0 : Present
Platform FPR-1010 with 8192 MBytes of main memory
BIOS has been successfully locked !!
MAC Address: 44:88:16:d0:3c:00
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Boot in 10 seconds. Boot in 9 seconds. Boot in 8 seconds. Boot in 7 seconds. Boot in 6 seconds. Boot in 5 seconds. Boot in 4 seconds. Boot in 3 seconds. Boot in 2 seconds. Boot in 1 second.
Warning: filesystem requires journal recovery
Located .boot_string
Image size 60 inode num 18, bks cnt 1 blk size 8*512
Attempt autoboot: "boot disk0:installables/switch/fxos-k8-fp1k-lfbff.2.10.1.217.SPA"
Warning: filesystem requires journal recovery
Located installables/switch/fxos-k8-fp1k-lfbff.2.10.1.217.SPA
Image size 191314816 inode num 57020, bks cnt 46708 blk size 8*512
+-------------------------------------------------------------------+
+------------------------- SUCCESS ---------------------------------+
+-------------------------------------------------------------------+
| |
| LFBFF signature authentication passed !!! |
| |
+-------------------------------------------------------------------+
LFBFF signature verified.
+-------------------------------------------------------------------+
+------------------------- SUCCESS ---------------------------------+
+-------------------------------------------------------------------+
| |
| LFBFF controller type check passed !!! |
| |
+-------------------------------------------------------------------+
Linux version: 4.18.45-yocto-standard (oe-user@oe-host) #1 SMP Sat Oct 1 17:46:24 UTC 2022
kernel_image = 0x73ab98f8, kernel_size=0x6452a0
Image validated
INIT: version 2.88 booting
Starting udev
Hardware tweak APPLIED: Disable SATA Throttle.1
Hardware tweak APPLIED: Disable SATA Throttle.2
Configuring network interfaces... done.
Starting random number generator daemon.
Primary SSD discovered
fsck from util-linux 2.32.1
[/sbin/fsck.ext3 (1) -- /dev/sda1] fsck.ext3 -a /dev/sda1
/dev/sda1: recovering journal
/dev/sda1: clean, 51/488640 files, 276918/1953024 blocks
fsck(/dev/sda1) returned 0
fsck from util-linux 2.32.1
[/sbin/fsck.ext3 (1) -- /dev/sda2] fsck.ext3 -a /dev/sda2
/dev/sda2: recovering journal
/dev/sda2: Clearing orphaned inode 45831 (uid=0, gid=0, mode=0100644, size=68861)
/dev/sda2: Clearing orphaned inode 45813 (uid=0, gid=0, mode=0100644, size=53537)
/dev/sda2: clean, 137/61056 files, 9897/244224 blocks
fsck(/dev/sda2) returned 0
fsck from util-linux 2.32.1
[/sbin/fsck.ext3 (1) -- /dev/sda3] fsck.ext3 -a /dev/sda3
/dev/sda3: recovering journal
/dev/sda3: Clearing orphaned inode 45797 (uid=0, gid=0, mode=0140600, size=0)
/dev/sda3: clean, 76/61056 files, 11526/244224 blocks
fsck(/dev/sda3) returned 0
fsck from util-linux 2.32.1
[/sbin/fsck.ext3 (1) -- /dev/sda4] fsck.ext3 -a /dev/sda4
/dev/sda4: recovering journal
/dev/sda4: clean, 12/1831424 files, 158992/7324160 blocks
fsck(/dev/sda4) returned 0
mount_disk_xfs. device: /dev/sda5, dir: /opt/cisco/csp, mount returned: 0.
Moving FXOS ramdisk to SSD ...
Moving FXOS ramdisk to SSD ... done
Starting TAm services ...
Device configuration status = TAM_SUCCESS
TAm Services started successfully
useradd: warning: the home directory already exists.
Not copying any file from skel directory into it.
useradd: warning: the home directory already exists.
Not copying any file from skel directory into it.
useradd: warning: the home directory already exists.
Not copying any file from skel directory into it.
useradd: warning: the home directory already exists.
Not copying any file from skel directory into it.
useradd: warning: the home directory already exists.
Not copying any file from skel directory into it.
useradd: warning: the home directory already exists.
Not copying any file from skel directory into it.
FIPS POST Test Script
NOTICE: The FIPS POST is not run because the FIPS feature is not enabled
Configuring packages on first boot.?・NIT: Entering runlevel: 3
Starting system message bus: dbus.
Starting OpenBSD Secure Shell server: sshd
done.
Starting rpcbind daemon...done.
starting statd: done
Starting Advanced Configuration and Power Interface daemon: acpid.
acpid: starting up with netlink and the input layer
acpid: 1 rule loaded
acpid: waiting for events: event logging is off
Starting DHCP server: .
starting 8 nfsd kernel threads: done
starting mountd: done
Starting ntpd: done
Restarting all devices.
Processing /etc/c3xxx_dev0.conf
Checking status of all devices.
There is 1 QAT acceleration device(s) in the system:
qat_dev0 - type: c3xxx, inst_id: 0, node_id: 0, bsf: 0000:01:00.0, #accel: 3 #engines: 6 state: up
Starting internet superserver: xinetd.
Starting fan control daemon: fancontrol... done.
INFO: beginning of manager_install
INFO: manager_install: fxmgr=/mnt/boot/installables/switch/fxos-k9-fp1k-manager.2.10.1.217.SPA chmgr= update=false
INFO: manager_install: fxmgr is dummy, skip_fxmgr_install=true
INFO: in validating image ...
INFO: manager_validate_image: fxmgr_absfilename /mnt/boot/installables/switch/fxos-k9-fp1k-manager.2.10.1.217.SPA
INFO: Validating image /mnt/boot/installables/switch/fxos-k9-fp1k-manager.2.10.1.217.SPA signature ...
: File /mnt/boot/installables/switch/fxos-k9-fp1k-manager.2.10.1.217.SPA size 1296
Done!
Computed Hash SHA2: 0889a278f0cf8dcb61eeedd0a9507b42
4143a54ef66496d394dd215bdd1b1c1c
3f170a634bccb4d10ae1d8f115d7d1aa
6e440973c8fe60b1c09bd916cb6a5b3a
Embedded Hash SHA2: 0889a278f0cf8dcb61eeedd0a9507b42
4143a54ef66496d394dd215bdd1b1c1c
3f170a634bccb4d10ae1d8f115d7d1aa
6e440973c8fe60b1c09bd916cb6a5b3a
The digital signature of the file: fxos-k9-fp1k-manager.2.10.1.217.SPA verified successfully
error: destination /var/log/btmp-20260527 already exists, skipping rotation
error: destination /var/log/wtmp-20260527 already exists, skipping rotation
INFO: manager_install: skip_fxmgr_install=true - delete unnecessary files and skip
INFO: deleting unnecessary xml file..!!
/bin/rm: cannot remove '/opt/cisco/kppm': Device or resource busy
/bin/mkdir: cannot create directory '/opt/cisco/kppm': File exists
INFO: deleted unnecessary xml file..!!
INFO: manager_post_install ...
INFO: manager_post_install: fxmgr=/mnt/boot/installables/switch/fxos-k9-fp1k-manager.2.10.1.217.SPA chmgr= update=false
INFO: manager_post_install: fxmgr is dummy
INFO: manager_post_install: Linking libraries ...
INFO: manager_post_install: Linking binaries ...
INFO: Trying to add iptables and ip6tables rules ...
INFO: Set up Application Diagnostic Interface ...
INFO: Configure management0 interface ...
Firepower 1xxx platform..
RTNETLINK answers: File exists
RTNETLINK answers: File exists
Assigning ip to eth0 in FPR-1xxx platform
ERROR: interface management0 is not ready after waiting for 60 seconds.
Current link status: [18: management0: mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000\ link/ether 44:88:16:d0:3c:00 brd ff:ff:ff:ff:ff:ff]
INFO: Configure rmu interface ...
Bring up rmu and swp1-swp8 switch interfaces
create and bringup lldp sub-interface on lldp-swp7, lldp-swp8
create and bringup lacp and mgmt sub-interface on (lacp-swp1 to lacp-swp8), (mgmt-swp1 to mgmt-swp8)
Stopping rpcbind daemon...
done.
stopping mountd: done
stopping nfsd: .done
INFO: Configure system files ...
INFO: System Name is: firepower-1010
Starting sensors logging daemon: sensord... done.
INFO: fp1000 asa copy appliance mode
INFO: cur reboot count is 1
INFO: max reboot count is 7
INFO: console : ttyS0, speed : 9600
INFO: manager_startup: setting up fxmgr apache ...
INFO: manager_startup: Start manager httpd setup...
INFO: manager_startup: using HTTPD_INFO persistent cache
/bin/rm: cannot remove '/tmp/openssl.conf': No such file or directory
httpdRegister INFO: [httpd.2559 -s -4 0.0.0.0 -n localhost]
httpdRegister INFO: SKIP httpd syntax check
httpdRegister INFO: Starting httpd setup/registration...
httpdRegister INFO: Completed httpd setup/registration!
INFO: httpdRegister [httpd.2559 script exit]
INFO: manager_startup: Completed manager httpd setup!
Starting crond: OK
1:/opt/cisco/csp/cores
/opt/cisco/csp/cores 31457280
Cisco ASA: CMD=-bootup, CSP-ID=cisco-asa.9.16.4__asa_001_JMX2631X0DCWLLB5B1, FLAG=''
Cisco ASA booting up ...
INFO: starting config regster monitor
firepower-1010 login: admin (automatic login)
Last login: Wed May 27 05:38:09 UTC 2026 on ttyS0
Successful login attempts for user 'admin' : 3
INFO: System Disk /dev/sda present. Status: Operable.
Waiting for Application infrastructure to be ready...
Verifying the signature of the Application image...
Creating FXOS swap file ...
Please wait for Cisco ASA to come online...1...
Please wait for Cisco ASA to come online...2...
Please wait for Cisco ASA to come online...3...
Please wait for Cisco ASA to come online...4...
Please wait for Cisco ASA to come online...5...
Please wait for Cisco ASA to come online...6...
Please wait for Cisco ASA to come online...7...
Please wait for Cisco ASA to come online...8...
Please wait for Cisco ASA to come online...9...
Please wait for Cisco ASA to come online...10...
Please wait for Cisco ASA to come online...11...
Cisco ASA: CMD=-bootup, CSP-ID=cisco-asa.9.16.4__asa_001_JMX2631X0DCWLLB5B1, FLAG='fromHconfFile'
Cisco ASA booting up ...
ASA start done pre
ASA Clear status
Deleting previous CGroup Configuration ...
Cisco ASA started successfully.
lina_init_env: memif is not enabled.
System Cores 4 Nodes 1 Max Cores 128
IO Memory Nodes: 1
IO Memory Per Node: 549453824 bytes num_pages = 134144 page_size = 4096
Global Reserve Memory Per Node: 786432000 bytes Nodes=1
LCMB: got DMA 1073741824 bytes on numa-id=0, phys=0x0000000200000000, virt=0x00007fc0c0000000
LCMB: HEAP-CACHE POOL got 782237696 bytes on numa-id=0, virt=0x00007fc10c200000
total_reserved_mem = 1073741824
total_heapcache_mem = 782237696
ERROR: fail to open /var/run/lina/meminfo_new
ERROR: fail to open /var/run/lina/meminfo_old
total mem 7511381607 system 8303558656 kernel 57125273 image 112396504
new 7511381607 old 661850328 reserve 1855979520 priv new 5712527360 priv old 0
Processor memory: 7511381607
M_MMAP_THRESHOLD 65536, M_MMAP_MAX 114614
POST started...
POST finished, result is 0 (hint: 1 means it failed)
Cisco Adaptive Security Appliance Software Version 9.16(4)
Compiled on Tue 11-Oct-22 17:13 GMT by builders
FPR-1010 platform
Total SSMs found: 0
Total NICs found: 5
x550em_kr rev 0x11 10 Gigabit Ethernet, index 00 MAC: 00a0.c900.0000
en_vtun rev00 Backplane Ext-Mgmt Interface @ index 03 MAC: 4488.16d0.3c01
en_vtun rev00 Backplane Tap Interface @ index 04 MAC: 0000.0100.0001
WARNING: Attribute already exists in the dictionary.
*** Intel QAT Crypto on-board accelerator detected
Encryption hardware device : Cisco FP Crypto on-board accelerator (revision 0x11)
Driver version : 4.11.0
Encryption hardware device : Cisco FP Crypto on-board accelerator (revision 0x11)
Driver version : 4.11.0
Encryption hardware device : Cisco FP Crypto on-board accelerator (revision 0x11)
Driver version : 4.11.0
Encryption hardware device : Cisco FP Crypto on-board accelerator (revision 0x11)
Driver version : 4.11.0
Encryption hardware device : Cisco FP Crypto on-board accelerator (revision 0x11)
Driver version : 4.11.0
Encryption hardware device : Cisco FP Crypto on-board accelerator (revision 0x11)
Driver version : 4.11.0
The 3DES/AES algorithms require a Encryption-3DES-AES entitlement.
The 3DES/AES algorithms require a Encryption-3DES-AES entitlement.
Cisco Adaptive Security Appliance Software Version 9.16(4)
****************************** Warning *******************************
This product contains cryptographic features and is
subject to United States and local country laws
governing, import, export, transfer, and use.
Delivery of Cisco cryptographic products does not
imply third-party authority to import, export,
distribute, or use encryption. Importers, exporters,
distributors and users are responsible for compliance
with U.S. and local country laws. By using this
product you agree to comply with applicable laws and
regulations. If you are unable to comply with U.S.
and local laws, return the enclosed items immediately.
A summary of U.S. laws governing Cisco cryptographic
products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by
sending email to export@cisco.com.
******************************* Warning *******************************
Cisco Adaptive Security Appliance Software, version 9.16
Copyright (c) 1996-2022 by Cisco Systems, Inc.
For licenses and notices for open source software used in this product, please visit
http://www.cisco.com/go/asa-opensource
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
config_fetcher: channel open failed
WARNING: MIGRATION - no startup configuration or configuration not found.
INFO: Power-On Self-Test in process.
........................
INFO: Power-On Self-Test complete.
INFO: Starting SW-DRBG health test...
INFO: SW-DRBG health test passed.
Creating trustpoint "_SmartCallHome_ServerCA" and installing certificate...
Trustpoint CA certificate accepted.
Creating trustpoint "_SmartCallHome_ServerCA2" and installing certificate...
Trustpoint CA certificate accepted.
INFO: Security level for "management" set to 0 by default.
INFO: Security level for "inside" set to 100 by default.
INFO: Security level for "outside" set to 0 by default.
User enable_1 logged in to ciscoasa
Logins over the last 1 days: 1.
Failed logins since the last login: 0.
Type help o '?' for a list of available commands.
ciscoasa> Attaching to ASA CLI ... Press 'Ctrl+a then d' to detach.
Type help or '?' for a list of available commands.
ciscoasa> show version
Cisco Adaptive Security Appliance Software Version 9.16(4)
SSP Operating System Version 2.10(1.217)
Device Manager Version 7.18(1)152
Compiled on Tue 11-Oct-22 17:13 GMT by builders
System image file is "disk0:/installables/switch/fxos-k8-fp1k-lfbff.2.10.1.217.SPA"
Config file at boot was "startup-config"
ciscoasa up 53 secs
Hardware: FPR-1010, 7163 MB RAM, CPU Atom C3000 series 2200 MHz, 1 CPU (4 cores)
Encryption hardware device : Cisco FP Crypto on-board accelerator (revision 0x11)
Driver version : 4.11.0
Number of accelerators: 6
1: Int: Internal-Data0/0 : address is 00a0.c900.0000, irq 10
3: Int: Not licensed : irq 0
4: Ext: Management1/1 : address is 4488.16d0.3c01, irq 0
5: Int: Internal-Data1/1 : address is 0000.0100.0001, irq 0
License mode: Smart Licensing
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 60
Inside Hosts : Unlimited
Failover : Disabled
Encryption-DES : Enabled
Encryption-3DES-AES : Disabled
Security Contexts : 0
Carrier : Disabled
AnyConnect Premium Peers : 75
AnyConnect Essentials : Disabled
Other VPN Peers : 75
Total VPN Peers : 75
AnyConnect for Mobile : Enabled
AnyConnect for Cisco VPN Phone : Enabled
Advanced Endpoint Assessment : Enabled
Shared License : Disabled
Total TLS Proxy Sessions : 160
Cluster : Disabled
Serial Number: JAD26300H4N
Configuration register is 0x1
Configuration last modified by enable_1 at 05:50:34.219 UTC Wed May 27 2026
ciscoasa>
|
![[N218] ☆ Cisco Firepower 1000 シリーズ アプライアンス FPR-1010 V01 ☆ Version 1.0.11 ☆拍卖](http://yahooimg2.ymibuy.cn/i/auctions.c.yimg.jp/images.auctions.yahoo.co.jp/image/dr000/auc0205/user/510a20dd8e8d235e1c8ca6e79cc265630066d6ee78ece5dccb6e179a32a263bb/i-img1200x900-17799573862260apruyh35.jpg)
![{$data['title']拍卖](http://yahooimg2.ymibuy.cn/i/auctions.c.yimg.jp/images.auctions.yahoo.co.jp/image/dr000/auc0205/user/510a20dd8e8d235e1c8ca6e79cc265630066d6ee78ece5dccb6e179a32a263bb/i-img1200x900-17799574107696e6pyxp66286.jpg)
![{$data['title']拍卖](http://yahooimg2.ymibuy.cn/i/auctions.c.yimg.jp/images.auctions.yahoo.co.jp/image/dr000/auc0205/user/510a20dd8e8d235e1c8ca6e79cc265630066d6ee78ece5dccb6e179a32a263bb/i-img1200x900-17799574190989hgkn2h8855.jpg)
