A22586)Juniper networks SRX300 現状品4台セット＊ACアダプタなし拍卖-51maijp【ymi.cn】

当前位置:首页 > 计算机 > 网络 > 路由器 > 周边设备 > A22586)Juniper networks SRX300 現状品4台セット＊ACアダプタなし

收藏该商品

A22586)Juniper networks SRX300 現状品4台セット＊ACアダプタなし

收藏该商品

A22586)Juniper networks SRX300 現状品4台セット＊ACアダプタなし: 商品编号：u1187163686 【浏览原始网页】

当前价：RMB 1246

加价单位：500日元

日元：24000.00円

出价：0次

账户升级，享受无限制出价！《会员制说明》

商品件数：1

商品成色：其他

日本邮费：买家承担

可否退货：不可以

开始时间：2025-07-28 22:30:26

结束时间：2025-07-29 22:30:26

自动延长：有可能

提早结束：有可能

商品详情参考翻译下标记录新手必读

划词翻译上线，鼠标选择文字自动翻译,翻译内容仅供参考，如有疑问请咨询小觅翻译。

Juniper networks SRX300 現状品4台セット＊ACアダプタなし
	商品説明＋＋＋

		御覧いただきありがとうございます１．メーカー、型番：　　＊Juniper networks SRX300 現状品4台セット＊ACアダプタなし。 2. ＊通電,コンソールまでの確認のみです。その他,詳しく確認しておりません。＊念のため,現状品でジャンク扱いです。＊外装に擦り傷・塗装剥げ・シール痕などがございます。＊他に見落としがありました際にはご容赦ください。＊完璧を求める方や神経質な方はご購入をお控えください。＊ご了承の上、検討してください。 3.付属品：＊本体のみです。ACアダプタなし。 4.4台の中に1台のコンソール結果下記です。 SPI stage 1 bootloader (Build time: Mar 3 2018 - 20:32:11) U-Boot 2013.07-JNPR-3.6 (Build time: Mar 03 2018 - 20:32:12) SRX_300 board revision major:1, minor:15, serial #: CV3519A＊＊＊＊＊ OCTEON CN7020-AAP pass 1.2, Core clock: 1200 MHz, IO clock: 600 MHz, DDR clock: 667 MHz (1334 Mhz DDR) DRAM: 4 GiB Clearing DRAM...... done Using default environment SF: Detected SF with page size 256 Bytes, erase size 64 KiB, total 8 MiB U-Boot 2013.07-JNPR-3.6 (Build time: Mar 03 2018 - 20:34:17) Using DRAM size from environment: 4096 MBytes SATA0: not available SATA1: not available SATA BIST STATUS = 0x0 SRX_300 board revision major:1, minor:15, serial #: CV3519A＊＊＊＊＊ OCTEON CN7020-AAP pass 1.2, Core clock: 1200 MHz, IO clock: 600 MHz, DDR clock: 667 MHz (1334 Mhz DDR) DRAM: 4 GiB Clearing DRAM...... done SF: Detected SF with page size 256 Bytes, erase size 64 KiB, total 8 MiB PCIe: Port 0 link active, 1 lanes, speed gen2 PCIe: Link timeout on port 1, probably the slot is empty PCIe: Port 2 not in PCIe mode, skipping Net: octeth0 Interface 0 has 1 ports (SGMII) Type the command 'usb start' to scan for USB storage devices. Boot Media: eUSB usb Found TPM SLB9660 TT 1.2 by Infineon TPM initialized Hit any key to stop autoboot: 0 SF: Detected SF with page size 256 Bytes, erase size 64 KiB, total 8 MiB SF: 1048576 bytes Read: OK ## Starting application ... Consoles: U-Boot console Found compatible API, ver. 3.6 USB1: Starting the controller USB XHCI 1.00 scanning bus 1 for devices... 2 USB Device(s) found USB0: Starting the controller USB XHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found FreeBSD/MIPS U-Boot bootstrap loader, Revision 2.10 (slt-builder@svl-junos-pool87.juniper.net, Sun Mar 4 10:30:52 PST 2018) Memory: 4096MB SF: Detected SF with page size 256 Bytes, erase size 64 KiB, total 8 MiB [0]Booting from eUSB slice 2 Loading /boot/defaults/loader.conf /kernel data=0xba2134+0x152c6c syms=[0x4+0xa0aa0+0x4+0xf07bf] Hit [Enter] to boot immediately, or space bar for command prompt. Booting [/kernel]... Kernel entry at 0x801000c0 ... init regular console Primary ICache: Sets 16 Size 128 Asso 39 Primary DCache: Sets 8 Size 128 Asso 32 Secondary DCache: Sets 1024 Size 128 Asso 4 CIU_FUSE 0x3/0x3 GDB: debug ports: uart GDB: current port: uart KDB: debugger backends: ddb gdb KDB: current backend: ddb kld_map_v: 0x8ff80000, kld_map_p: 0x0 Running in PARTITIONED TLB MODE Copyright (c) 1996-2019, Juniper Networks, Inc. All rights reserved. Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. JUNOS 15.1X49-D180.2 #0: 2019-05-14 22:30:29 UTC builder@ralenth:/volume/build/junos/15.1/service/15.1X49-D180.2/obj/octeon/junos/bsd/kernels/JSRXNLE/kernel can't re-use a leaf (perf_mon)! can't re-use a leaf (threshold)! can't re-use a leaf (debug)! JUNOS 15.1X49-D180.2 #0: 2019-05-14 22:30:29 UTC builder@ralenth:/volume/build/junos/15.1/service/15.1X49-D180.2/obj/octeon/junos/bsd/kernels/JSRXNLE/kernel real memory = 4294967296 (4194304K bytes) avail memory = 2621882368 (2500MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot) Security policy loaded: Junos MAC/veriexec (mac_veriexec) Security policy loaded: JUNOS MAC/pcap (mac_pcap) MAC/veriexec fingerprint module loaded: SHA1 MAC/veriexec fingerprint module loaded: SHA256 netisr_init: !debug_mpsafenet, forcing maxthreads from 2 to 1 cpu0 on motherboard : CAVIUM's OCTEON 70XX/71XX CPU Rev. 0.2 with no FPU implemented L1 Cache: I size 78kb(128 line), D size 32kb(128 line), thirty two way. L2 Cache: Size 512kb, 4 way obio0 on motherboard uart0: on obio0 uart0: console (9600,n,8,1) twsi0 on obio0 set clock 0x31 xhci0: on obio0 usb0: on xhci0 usb0: USB revision 3.0 uhub0: vendor 0x0000 XHCI root hub, class 9/0, rev 3.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered xhci1: on obio0 usb1: on xhci1 usb1: USB revision 3.0 uhub1: vendor 0x0000 XHCI root hub, class 9/0, rev 3.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered cpld0 on obio0 pcib0: on obio0 Disabling Octeon big bar support pcib0: Initialized controller pci0: on pcib0 pci0: at device 0.0 (no driver attached) pci0: at device 0.1 (no driver attached) gblmem0 on obio0 octpkt0: on obio0 cfi0: on obio0 cfi1: on obio0 umass0: Swissbit USB Flash Module, rev 2.00/1.00, addr 2 Timecounter "mips" frequency 1200000000 Hz quality 0 Registered AMT tunnel Encap with UDP Tunnel! Loading Redundant LT driver ###PCB Group initialized for udppcbgroup ###PCB Group initialized for tcppcbgroup da0 at umass-sim0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: 7648MB (15663104 512 byte sectors: 255H 63S/T 974C) Kernel thread "wkupdaemon" (pid 51) exited prematurely. Trying to mount root from ufs:/dev/da0s2a WARNING: / was not properly dismounted WARNING: clock 1983 days greater than file system time MFSINIT: Initialising MFSROOT WARNING: / was not properly dismounted Process-1 beginning MFSROOT initialization... Creating MFSROOT... /dev/md0: 20.0MB (40956 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 5.00MB, 320 blks, 640 inodes. super-block backups (for fsck -b #) at: 32, 10272, 20512, 30752 Populating MFSROOT... Creating symlinks... Setting up mounts... Continuing boot from MFSROOT... Attaching /cf/packages/junos via /dev/mdctl... Mounted junos package on /dev/md1... J WARNING: R/W mount of /cf/var denied. Filesystem is not clean - run fsck mount: /dev/bo0s3f : Operation not permitted /dev/bo0s3f Last Mounted on /cf/var Phase 1 - Check Blocks and Sizes Phase 2 - Check Pathnames Phase 3 - Check Connectivity Phase 4 - Check Reference Counts UNREF FILE I=282650 OWNER=0 MODE=100640 SIZE=989028 MTIME=Jan 1 02:55 2022 CLEAR? yes UNREF FILE I=329812 OWNER=0 MODE=100644 SIZE=0 MTIME=Dec 27 05:14 2019 CLEAR? yes Phase 5 - Check Cyl groups FREE BLK COUNT(S) WRONG IN SUPERBLK SALVAGE? yes SUMMARY INFORMATION BAD SALVAGE? yes BLK(S) MISSING IN BIT MAPS SALVAGE? yes 495 files, 52747 used, 2532207 free (311 frags, 316487 blocks, 0.0% fragmentation) * FILE SYSTEM MARKED CLEAN * * FILE SYSTEM WAS MODIFIED * Automatic reboot in progress... Verified jboot signed by PackageProductionEc_2019 method ECDSA256+SHA256 Verified junos signed by PackageProductionEc_2019 method ECDSA256+SHA256 Verified junos-15.1X49-D180.2-domestic signed by PackageProductionEc_2019 method ECDSA256+SHA256 Checking integrity of BSD labels: s1: Passed s2: Passed s3: Passed s4: Passed /dev/bo0s3e Last Mounted on /config Phase 1 - Check Blocks and Sizes Phase 2 - Check Pathnames Phase 3 - Check Connectivity Phase 4 - Check Reference Counts Phase 5 - Check Cyl groups 30 files, 49 used, 94667 free (19 frags, 11831 blocks, 0.0% fragmentation) *** FILE SYSTEM MARKED CLEAN * /dev/bo0s3f FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 2532207 free (311 frags, 316487 blocks, 0.0% fragmentation) Checking integrity of licenses: Checking integrity of configuration: rescue.conf.gz: Passed LPC bus driver lpcbus0 on cpld0 tpm0: on lpcbus0 tpm: IFX SLB 9660 TT 1.2 rev 0x10 hw.re.gres_sync_other: 0 -> 1 Loading configuration ... mgd: Running FIPS Self-tests veriexec: no fingerprint for file='/sbin/kats/cannot-exec' fsid=78 fileid=2476236 gen=1 uid=0 pid=952 mgd: Time and ticks drifted too much, resetting synchronization... mgd: commit complete Setting initial options: . Starting optional daemons: usbd. Doing initial network setup:. Initial interface configuration: additional daemons: eventd. checking for core dump... savecore: Reboot reason(s): 0x1: power cycle/failure savecore: Reboot reason(s): 0x1: power cycle/failure savecore: no dumps found Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot/modules;/cryptosoft0: on motherboard IPsec: Initialized Security Association Processing. modules/ifpf kld kats kldkldload: can't load kats.ko: File exists . Doing additional network setup:. Starting final network daemons:. setting ldconfig path: /usr/lib /opt/lib starting standard daemons: cron. Initial rc.mips initialization:. Local package initialization:. starting local daemons:set cores for group access . kern.securelevel: -1 -> 1 hw.re.gres_sync_other: 1 -> 0 Creating JAIL MFS partition... JAIL MFS partition created Boot media /dev/da0 has dual root support ** /dev/da0s1a FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 167099 free (91 frags, 20876 blocks, 0.0% fragmentation) chassis.ko loaded Loading JUNOS chassis module chassis_init_hw_chassis_startup_time: chassis startup time 0.000000 Sun Jun 1 22:40:51 JST 2025 SRX300-JSB-L/jpnoc-tnsc-fw02 jpnoc-tnsc-fw02 (ttyu0) login:

	注意事項＋＋＋

		＊専門知識が不足のため、保証が対応しておりません。　ジャンク扱いで返品返金を対応しておりません。＊付属ソフトは本体にインストール、認証済みですが、　メディアは一切付きません。＊運送事故などがあった場合は責任を取りかねますのでご理解ください。＊中古品となりますので外観は多少傷、汚れ、　使用感等ございますことご了承ください。＊他に見落としがありました際にはご容赦ください。　完璧を求める方や神経質な方はご購入をお控えください。＊送料は梱包材費など含みます。ご了承ください。＊写真で判断しご了承の上ご入札ください。　(テスト用品が付属されていません。ご注意してください)。＊キャンセルされる場合は落札金額の30%を頂戴いたします。＊入札の取り消しについて平日(月～金)09:00~17:00しか対応しておりません。　祝日,時間外に対応出来かねます。ご了承ください。＊追跡番号付いてない配送方法について　紛失、届かなかった場合は当方保証しておりません。　対応しておりません。ご了承ください。＊土曜・日曜・祝日は発送いたしません、　　お急ぎの方はご遠慮ください。＊落札後7日経過しても連絡及び入金がない場合は　取り消しさせていただきます。（その場合、自動的に「悪い」評価が付きます）。＊商品に関して質問がございましたら入札前質問提出してください。　落札後、ノークレーム、ノーリターンでお願いいたします。　　　ご理解の上、ご入札をお願い申し上げます。＊管理番号：A22586

	送付方法＋＋＋

		ゆうパック

	支払方法＋＋＋

		Yahoo!かんたん決済（詳細）

■ ゆうパック ■　80サイズ　発送元:千葉県

千葉県	1,130円
北海道	1,710円
青森県秋田県岩手県宮城県山形県福島県	1,200円
茨城県栃木県群馬県埼玉県神奈川県東京都山梨県	1,200円
新潟県長野県	1,200円
富山県石川県福井県	1,200円
静岡県愛知県三重県岐阜県	1,200円
大阪府京都府滋賀県奈良県和歌山県兵庫県	1,310円
岡山県広島県山口県鳥取県島根県	1,440円
香川県德島県愛媛県高知県	1,440円
福岡県佐賀県長崎県熊本県大分県宮崎県鹿児島県	1,710円
沖縄県	1,810円